Epoxy resin board
1.The most common way is to use the 70% alcohol to clean the board before and after the work.
2.If only wish to remove the dirty on the surface, wet cloth is enough. However, if the dirty is difficult to be removed, the dosmetic detergent is recommended Nevertheless, detergent with milling materials is not permitted, neither is the wax polishment.
3.The oil stains and the scores generated by metal, rubber and the analogues can be cleaned by the cloth dipped with naphtha or solvents.
4.At a fixed period, people should clean and polish the board with paper or clean rags dipped with the products of Crystal Simple Green or by using the bright oil.
5.If wish to restore the original shine of the board, you should clean the board with the cloth dipped with oil followed by the wiping by dried cloth. |
|
Physicochemical board:
1.Do not put the board under the temperature exceeding 135 oC with a long time.
2.Do not put the board under the naked flame, melted metal, metal sparkles or sun, and never cut or chop anything at the surface of the board.
3.The flame of the coal gas lamp or alcohol lamp will spoil the surface of the board, so the coal gas lamp or alcohol lamp should be kept on the tripod for using.
4.It is recommended to clean the board by mild water, acetone or mild detergent, such as the detergent used to wash hand and bowl. Do not use the detergent with milling materials and strong acid because such detergent will spoil the surface of the board. To clean the obstinate dirty, hydrogen peroxide should be dripped onto the board followed by the washing with water. |
